Baquacil Sanitizer & Algistat
$52.99
The principle chemical in the BAQUACIL® Pool Care System is a chlorine-free liquid sanitizer that provides safe, consistent control of bacteria and algae. It has a long shelf life, is highly stable in water and lasts longer than chlorine without any of chlorine’s unpleasant side effects.
Compatible with BAQUACIL® pools only. Step 1 in the 3-step BAQUACIL® Pool Care System.
Available sizes: 1/2 gal.
- Description
- Additional information
Description
Start Up: 1/2 gallon per 10,000 gallons of water to obtain 50 ppm Sanitizer level.
Maintenance: 1 pt per 10,000 gallons to raise level by 10 ppm.
Freshly Filled and Dechlorinated Pools Start Up with Baquacil: Note: If the pool water contains algae or is hazy, consult your Baquacil Dealer. Backwash or chemically clean your pool filter. Check pool pH; adjust to 7.2 to 7.6 if necessary. Add Baquacil Sanitizer to give a content of 50 ppm (1/2 gallons product per 10,000 gallons of pool water.) After 24 hours check pH and Baquacil Sanitizer concentration with Baquacil Test Strips and adjust if necessary.
Normal Pool Routine: Every week, check Baquacil Sanitizer concentration and pH. Maintain Baquacil Sanitizer concentration at about 50 ppm. If concentration falls 10 ppm or more, add a top-u dose. The level should not be allowed to drop below 30 ppm. For example, to raise the Baquacil Sanitizer level 10 ppm, add 1 pint per 10,000 galloons of water. Consult your Baquacil Dealer for calculation instructions.
Problem Solving and supplemental pool information: Do not use in freestanding spas/hot tubs. Do not use in unpainted plaster pools previously exposed to metals, which may cause staining. Baquacil is not compatible with many detergents and some supplemental algicides (such as those based on copper). If algae development, cloudiness, or pool problems occur or additional information on water qualtiy is desired, consult your dealer.
Additional information
| Weight | 1.0000 lbs |
|---|
